To avoid being caught into the following UAG events, follow the below procedure to create a correct Trunk and an Application in UAG 2010.
Warning 58 “The requested URL is not associated with any configured application.”
Warning 51 Invalid Method
“A request from source IP address x.x.x.x, user on trunk Trunk Name; Secure=1 for application failed because the method used PUT is not valid for requested URL”
1. Bypass Active Directory authentication to allow application specific authentication.
Open Regedit>Go to HKLMSoftwareWhaleCome-GapvonURLFilter
Create a 32 Bit DWORD named KeepClientAuthHeader and set value to 1
Also make sure FullAuthPassThru value is set to 1.
2. Public Host Name in Trunk must be different then public host name in published application. The purpose of public host name in Trunk is to create the actual trunk. This public host name in Trunk will not be accessible from external network nor internal network. Why? simple reason without public host name, you can’t create a Trunk. Public host name in application is the Real FQDN which employee/roaming users will access from external network which means public IP will resolve the name of application public host name. Since public host name in Trunk and Public host name in application are different, when you activate this trunk and application, you will receive a certificate error which says your trunk FQDN doesn’t match with your certificate. As long as your certificate CN matches with application public host name you will be fine. If you don’t want to see this error then you can add a SAN certificate which has both Trunk public host name and application public host name. In my case I don’t mind the see that certificate warning, my Trunk and application public host name are as follows:
- Trunk Public Host Name: Mobile.mydomain.com
- Application Public Host Name: mymobile.mydomain.com
3. Correct URL Set
- Name: MobilePortal_Rule1
- Action: Accept
- URL: /.*
- Parameters: Ignore
- Methods: PUT, POST, GET
Use the following steps to correctly publish mobile device, third party application implemented in IIS within a subdirectory.
Step1: Create a Separate Trunk for this Application
- Before you begin, import certificate in UAG server. Certificate must be in .pfx format with private key. Open the Microsoft Management Console (MMC) which enables you to import a certificate into the IIS Certificate store.
- Start Menu>Run>MMC
- To import a certificate, in the MMC window, in the left pane, under Console Root, verify that Certificates (Local Computer) > Personal is selected.
- From the Action menu, click All Tasks, and then click Import.
- Follow the instructions in the Certificate Import Wizard.
- In the Forefront UAG Management console, right-click HTTP Connections to create a trunk accessible over HTTP, or right-click HTTPS Connections to create a trunk accessible over HTTPS. Then click New Trunk.
- On the Select Trunk Type page of the Create Trunk Wizard, click Portal trunk.
- On the Setting the Trunk page of the Create Trunk Wizard, specify Trunk details. In my case I have the following:
i. Trunk Name: MobilePortal
ii. Public Host Name: Mobile.mydomain.com
iii. IP Address: Trunk IP (you must add additional IP address(s) in the TCP/IP properties of UAG external nic)
iv. Port: 443
- On the Authentication page of the Create Trunk Wizard, I am going to add my domain controller but later stage I will remove the domain controller to make it application specific authentication not LDAP or AD. That means I will bypass AD authentication. For now select an authentication server that will be used to authenticate user requests for trunk sessions. Click Add to select a server, as follows:
- In the Authentication and Authorization Servers dialog box, select a server and click Select. To add a new server to the list, click Add.
- Select User selects from a server list to specify that during login to the trunk, users will be prompted to select an authentication server. If you configure one authentication server, users will authenticate to that server only. Select Show server names to allow users to select an authentication server from a list; otherwise, users must enter the server name. Select User provides credentials for each selected server to prompt users during login to authenticate to all the specified authentication servers. Select Use the same user name to specify that users must enter a single user name that will be used to authenticate to all specified servers.
- On the Certificate page of the Create Trunk Wizard (HTTPS trunks only), select the server certificate that will be used to authenticate the Forefront UAG server to the remote endpoint.
- On the Endpoint Security page of the Create Trunk Wizard, control access to trunk sessions by selecting policies that allow access, based on the health of client endpoints. Click Use Forefront UAG access policies to determine the health of endpoints using in-built Forefront UAG access policies.
- Click Finish after completing the Trunk wizard.
Step2: Advanced Trunk Configuration
- Click Configure Trunk. Click Endpoint Access Settings, Click Edit Endpoint Policies.
- In this step, you will allow access of mobile phone and tablet. Microsoft UAG by default doesn’t allow mobile phone access. You need allow this access manually. Click Edit Endpoint Access Policies, Select Default Session Access, Click Edit, Click other, Select Always. Click Ok. Repeat the step for Default Privileged Endpoint, Default Web Application Access Policy, Default Web Application Upload, Default Web Application download.
- Click Authentication Page, de-select require user to authenticate at session logon. By deselecting this option, you have created pass through authentication.
- Click on the session tab, deselect disabled component installation and disable scripting for portal applications.
- Click URL Set Tab, Scroll down to bottom of the page. On the mobile portal rule, select PUT, POST, GET. Click Ok. Adding PUT will resolve the following issue:
- After completing the Create Trunk Wizard, in the Forefront UAG Management console, on the toolbar, click the Activate configuration icon on the toolbar, and then on the Activate configuration dialog box, click Activate.
Step3: Add an Application Specific Host Name for iPhone, Android and Tablet
1. In the Forefront UAG Management console, select the portal trunk to which you want to add the application. In the main trunk properties page, in the Applications area, click Add to open the Add Application Wizard.
2. On the Select Application page, Click Web, choose the application specific host name you want to publish.
3. On the Application Setup page, specify the name and type of the application.
4. On the Endpoint Security page, select the access policies for your application. Note that not all of the policies may be available for some published applications. You must verify that other device is allowed in Endpoint security. See Step11 in creating a Trunk.
5. On the Application Deployment page, specify whether you want to publish a single server or a Web farm.
6. On the Web Servers page, if you are publishing a Web application, on the Web Servers page, configure settings for the backend Web server that you want to publish. On the application requires paths, add more / as your path. This will allow any sub directories of application hosted in Microsoft IIS server. On the address, type the fully qualified domain name of the web application which will be accessible from external network.
7. On the Connectivity Verifier Settings page, if you are publishing a Web farm, specify how the state of Web farm members should be detected.
8. On the Authentication page, deselect SSO. By deselecting this option, you have created pass through authentication.
9. On the Portal Link page, specify how the application appears in the portal home page of the trunk. If you have subdirectory in IIS, specify correct URL. For example, in my case I have subdirectory like https:// mymobile.mydomain.com/mobile/ .Select premium and non-premium mobile portal.
10. Once done, Click Finish.
11. On the Trunk , On the initial application, Select Portal Home page, as MobilePortal.
Step4: Activating Trunk and Post Check.
1. On the console toolbar, click the Activate configuration icon, and then on the Activate Configuration dialog box, click Activate.
2. This is the simple step, most of techie doesn’t do and end up being calling Microsoft Tech support. You have to do this step so that published application works. Open command prompt as an administrator, run iisreset /restart.
3. Once everything is configured correctly, you will receive the following event in UAG Web Monitor> Event Viewer
The application MobilePortal was accessed on trunk; Secure=1 with user name and session ID EDD953BD-CB79-4180-B811-F1A0F53DCB33.
Part 1: Install and Configure Forefront UAG Step by Step
Part 2: Publish RDS using Forefront UAG 2010 Step by Step
Part 3: Publish Exchange Server 2010 Using Forefront UAG 2010 Step by Step
Part 4: Redirect Web Application from HTTP to HTTPS using Forefront UAG 2010 Step by Step
Part 5: Publish SharePoint Server 2010 Using Forefront UAG 2010 Step by Step
Part 6: Experience Mobile Browsing Using UAG 2010
Part 7: Publish FTP using UAG 2010
Part 8: Publish Application Specific Host Name using UAG 2010
Part 9: FF UAG 2010 Patching Order
Part 10: Publish Lync 2013 Using UAG 2010